Preventing the formation of lime deposits in water uses an electronic lime controller which generates an electronically modulated frequency, amplified triangulated wave form which is then oscillated to change the separation characteristics of calcium and carbonates before it enters the water system. The process is purely physical as it uses no chemical additives.
Electronic descalers produce a wave pattern which addresses the polarity of water and its ability to contain particulants. When the water molecule enters the field of disturbance it is reversed in polarity. During this reversal the contaminant is released and is also affected by the electronic polarity change. This is a continuing change since the field is osillated to change polarity and frequency and the amplitude as well. This wave form of a triangulated shape is critical in production of treatment due to the fact that water can only be addressed when it changes polarity. Hence the square wave generators commonly used are only effective on vertical lines indicating polarity change, only during this limited time (5%) is this field effective. The triangulated wave is continuously changing polarity and is therefore more efficient. When the water molecule is reversed it releases its contaminant and immediately searches for matter to replace the lost substance. In this instance it would be previous scale accumulation which in turn descales existing systems as well as prevents further encrustations.
(As
shown on the figure, there is no treatment of water during the high plateaus)
Triangulated Wave Generators
The aqua-tron uses triangular wave generators that modulate the amp and frequency from 2,000 to 9,500. Our power runs from 25 mAmp to 250 mAmp. Therefore it provides more power to the solenoid.
Water is treated on reversal of polarity and provides continuous treatment of water
The aqua-tron is designed so that anyone can install it even if they have no or limited mechanical abilities. The individual simply plugs one end of the cable into the bottom of the unit. The cable is then wrapped around the water line the correct amount of times (5 wraps for each 1/4" . . . a 3/4" pipe would have 15 wraps), then the end is plugged into the other area on the bottom of the unit.
Then, the individual would plug the AC adapter into the unit and then into a domestic electrical outlet. That's it, it's done! We offer a 90 day money back guarantee if not satisfied, too.
If you have any additional questions about the aqua-tron, please give us a call at 717-337-9325. Our office hours are 9 am to 3 pm Eastern Time Monday through Friday. You can also reach us via email at: ecotech@superpa.net.